Need on-site training, VOCs, or alternative dates?

Online Enquiry

Butt & Electrofusion Poly Welding Course in Perth

PMBWELD301E & PMBWELD302E Join Polyethylene Plastic Pipelines using Butt Welding and Electrofusion Welding

Course cost
$850*
Course duration
2 Days
Next available public session
01 Dec
CTF

Rebate available, save $496 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Combined butt welding and electrofusion training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This combined course describes the skills and knowledge required to join polyethylene (commonly referred to as PE) plastic pipelines using both butt welding and electrofusion welding, both in the field and under factory conditions.

  • Two certifications in two days
  • Cost-effective combo pricing
  • Industry-standard welding equipment
  • Field and factory welding conditions covered
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training Fund

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must be 16 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

1 upcoming session · PMBWELD301E & PMBWELD302E

to 02 Dec 2026 · 2 days

$750.00

3 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Join Polyethylene Plastic Pipelines using Butt Welding and Electrofusion WeldingPMBWELD301E & PMBWELD302E · ID 51051
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Join Polyethylene Plastic Pipelines using Butt Welding and Electrofusion Welding - PMBWELD301E & PMBWELD302E

Objectives

What you will be assessed on across 9 unit elements.

01PMBWELD301E: Identify compatibility of materials for welding

  • Identify materials as polyethylene from job specifications and worksite instructions.
  • Check compatibility of polyethylene materials and pipes supplied with welding requirements from specifications.

02PMBWELD301E: Calculate pipe welding parameters

  • Identify welding machine type and operating data from job specifications.
  • Identify pipe materials and dimensions from job specifications.
  • Perform welding parameter calculations, including those for durations and pressure, to reflect specifications of individual welding machines and pipe details.
  • Prepare field operational sheets according to workplace procedures.

03PMBWELD301E: Maintain and adjust welding equipment

  • Set up welding equipment and work area to suit job requirements.
  • Ensure safety equipment is available and operational.
  • Inspect equipment, and report on and rectify non-conforming equipment.
  • Check operation of equipment and adjust heating, trimming, and pressure systems using equipment readings and specifications.

04PMBWELD301E: Perform butt welding operations

  • Assemble pipeline components in welding machine as required to support welding task.
  • Clean, align and trim pipe ends according to workplace procedures.
  • Perform heating, welding, and cooling phases using calculated butt welding parameters.
  • Monitor and accurately record achieved butt welding parameters for each joint.
  • Clean-up equipment following completion of welding according to equipment instructions.
  • Clean-up work area, and apply waste management strategies to dispose of scrap materials according to workplace procedures.
  • Use personal protective equipment (PPE) according to workplace procedures.

05PMBWELD301E: Visually inspect completed joints

  • Identify quality standards for visible characteristics of joints from job specifications.
  • Assess joints against standards and report results, including non-conforming results.
  • Accurately maintain records and logbooks.

06PMBWELD302E: Identify compatibility of commercial electrofusion control systems

  • Identify electrofusion welding control unit type and operating data from job specifications.
  • Identify compatibility of polyethylene pipe material and dimension with electrofusion fittings requirements from job specifications.
  • Identify compatibility of control unit with electrofusion fitting control requirements from job specifications

07PMBWELD302E: Maintain and adjust electrofusion control unit equipment

  • Set up electrofusion welding equipment and work area to suit job requirements.
  • Ensure safety equipment is available and operational for requirements.
  • Inspect equipment, and report on and rectify non-conforming equipment.
  • Check operation of equipment using equipment readings and specifications.

08PMBWELD302E: Perform electrofusion welding operations

  • Prepare pipe and fitting according to specification.
  • Perform heating, welding and cooling phases using calculated electrofusion welding parameters.
  • Monitor and accurately record achieved electrofusion welding parameters for each joint according to workplace procedures.
  • Clean-up and maintain equipment following completion of welding according to equipment instructions.
  • Clean-up work area, and apply waste management strategies to dispose of scrap materials according to workplace procedures.

09PMBWELD302E: Visually inspect completed electrofusion joints

  • Identify quality standards for visible characteristics of electrofusion joints from job specifications.
  • Visually assess joints against job requirements and report results, including non-conforming results.
  • Accurately maintain records and logbooks.

Frequently Asked Questions

Do I receive two certifications from the combined poly welding course?

Yes. On successful completion you will receive a Statement of Attainment covering both PMBWELD301E Join Polyethylene Plastic Pipelines using Butt Welding and PMBWELD302E Join Polyethylene Plastic Pipelines using Electrofusion Welding, two nationally recognised units of competency.

How long are the poly welding tickets valid for?

Your Statements of Attainment do not have a legislated expiry date, however many employers, water authorities and mine sites require re-validation of poly welding competencies every 2–3 years. Always check your employer's specific requirements before commencing work.

Why do the butt welding and electrofusion courses combined?

Most polyethylene pipeline projects require both jointing methods, so completing the two units together over two consecutive days saves you time and costs less than booking the two courses separately.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. All welding equipment is provided by STES. Lunch and refreshments are not provided so we recommend bringing your own.