Need on-site training, VOCs, or alternative dates?

Online Enquiry

Working at Heights Ticket Course in Perth

RIIWHS204E Work Safely at Heights

!

Work Safely at Heights Refresher

Need a refresher? Short notice, self-paced in-house daily refresher courses available.

Enquire now
Course cost
$260*
Course duration
1 Day
Next available public session
17 Nov
CTF

Rebate available, save $182 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Working at Heights training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries. It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

  • Same-day certification available
  • Mining industry approved training
  • Practical hands-on experience
  • Multiple Perth locations
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training Fund

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must be 16 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

47 upcoming sessions · RIIWHS204E

Tuesday

$260.00

5 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Work Safely at HeightsRIIWHS204E · ID 46092
Enrol myselfEnrol employee(s)
Friday

$260.00

7 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Work Safely at HeightsRIIWHS204E · ID 46069
Enrol myselfEnrol employee(s)
Tuesday

$260.00

6 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Work Safely at HeightsRIIWHS204E · ID 46093
Enrol myselfEnrol employee(s)
Friday

$260.00

5 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Work Safely at HeightsRIIWHS204E · ID 46070
Enrol myselfEnrol employee(s)
Tuesday

$260.00

7 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Work Safely at HeightsRIIWHS204E · ID 46094
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Work Safely at Heights - RIIWHS204E

Objectives

What you will be assessed on across 5 unit elements.

01Identify work requirements

  • Obtain, interpret and confirm work requirements.
  • Access, interpret and apply documentation required to work safely at heights.
  • Identify and address potential risks, hazards and environmental issues, and implement control measures according to workplace procedures.
  • Inspect worksite to determine layout and physical condition, condition of structures and equipment requirements.
  • Adhere to legislative requirements.
  • Select appropriate plant, tools and equipment for the job, inspect them for serviceability and rectify or report any faults prior to commencement of work activities.
  • Select and wear personal protective equipment appropriate for work activities.
  • Obtain and interpret emergency procedures, and be prepared for emergency situations.

02Identify work procedures and instructions

  • Consult with relevant personnel to select materials, tools and equipment required for the work activities.
  • Inspect and install fall protection and perimeter protection equipment.
  • Identify methods of moving tools and equipment to the work area according to workplace procedures.
  • Ensure the safety system has been installed according to workplace procedures.
  • Select and install appropriate signs and barricades according to workplace procedures.

03Access and install equipment

  • Consult with relevant personnel to ensure anchor fall protection and associated equipment is fitted and adjusted according to workplace procedures.
  • Ensure all required equipment is installed according to workplace procedures.
  • Access work area for people, tools and equipment according to workplace procedures.
  • Locate tools and materials to eliminate or minimise the risk of items being knocked down.

04Perform work at heights

  • Check access from ground to work area and ensure it is safe according to workplace procedures
  • Keep fall equipment in place and adjusted appropriately for movement during work
  • Undertake manual handling of materials and equipment according to workplace procedures
  • Locate materials and equipment ensuring that they are safely secured and distributed according to workplace procedures
  • Check safety system periodically for compliance
  • Monitor risk control measures to ensure that they are effective and appropriate according to workplace procedures
  • Reassess risk control measures, as required, in accordance with workplace procedures and undertake alterations

05Clean up work area

  • Consult with relevant personnel to ensure safety system is dismantled and removed according to workplace procedures
  • Clear work area and dispose of materials
  • Clean and maintain the plant and equipment, inspect for ensure serviceability and rectify or report any faults or issues to relevant personnel
  • Process written maintenance records according to workplace procedures

Frequently Asked Questions

Is Working Safely at Heights a High Risk Work Licence?

No. Working Safely at Heights (RIIWHS204E) is a general safety unit, not a WorkSafe WA High Risk Work (HRW) Licence. There is no WorkSafe licence application or card involved, you receive a nationally recognised Statement of Attainment confirming you are competent to work safely at heights.

How long is a Working at Heights ticket valid for?

Your RIIWHS204E Statement of Attainment does not have a legislated expiry date, however most employers and mine sites in Western Australia require refresher training every 2–3 years to ensure your skills and knowledge remain current. Always check your employer's specific site requirements before commencing work.

Is RIIWHS204E recognised for mining and resources work in WA?

Yes. RIIWHS204E Work Safely at Heights is a nationally recognised unit of competency under the Resources and Infrastructure Industry Training Package. It is widely accepted across mining, construction, oil & gas, and infrastructure sites throughout Western Australia and the rest of Australia.

What is the difference between a WAH ticket and a WAH Supervisor ticket?

RIIWHS204E covers working safely at heights as an operative, selecting PPE, using fall-arrest equipment, and following safe work procedures. RIIWHS302E (Supervise Work at Heights) is an advanced unit for those responsible for planning, directing, and supervising height work for others. If you are managing or supervising a team working at heights, you will need the supervisor unit in addition to RIIWHS204E.

Can I do a refresher instead of repeating the full WAH course?

Yes. If you already hold a current or recently lapsed RIIWHS204E qualification, STES offers a self-paced in-house refresher course with same-day certification. This is a shorter assessment-focused session rather than a full training day. Contact us on 9418 8555 or email info@stes.com.au to confirm your eligibility.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. All safety equipment including harnesses and lanyards is provided by STES. Lunch and refreshments are not provided so we recommend bringing your own.