Need on-site training, VOCs, or alternative dates?

Online Enquiry

C2 Slewing Crane Licence & Ticket Course in Perth

TLILIC0022 Licence to Operate a Slewing Mobile Crane (up to 20 tonnes)

Course cost
$1700*
Course duration
4 Days
Next available public session
23 Nov
CTF

Rebate available, save $1190 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
C2 slewing crane training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 20 tonnes in accordance with all relevant legislative responsibilities. A person performing this work is required to hold a high risk work licence (HRWL).

  • 4-day comprehensive training
  • Multiple Perth locations
  • Training and assessment for the C2 slewing crane high risk work licence
  • CTF rebate available
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training Fund

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must hold a current CPCCLDG3001 Licence to perform dogging.
  • Must be 18 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence) or at least THREE secondary documents (birth certificate, Medicare, utility bill, not older than 12 months).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

1 upcoming session · TLILIC0022

to 26 Nov 2026 · 4 days

$2,000.00

7 left
Time
08:00 – 16:00
Location
Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course
Licence to Operate a Slewing Mobile Crane (up to 20 tonnes)TLILIC0022 · ID 50198
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Licence to Operate a Slewing Mobile Crane (up to 20 tonnes) - TLILIC0022

Objectives

What you will be assessed on across 4 unit elements.

01Plan work/task

  • Task requirements are identified from work orders or equivalent, a lift plan is confirmed with associated personnel and a site inspection is conducted in accordance with workplace procedures.
  • Work area operating surface is confirmed to determine ground suitability for operational use of mobile crane in accordance with workplace procedures.
  • Mobile crane Rated Capacity (RC) and the lifting gear Working Load Limit (WLL) are established for the load/s and work/task requirements in accordance with manufacturer requirements and workplace procedures.
  • Appropriate paths for operating the mobile crane and moving and placing load/s in work area are assessed and determined in accordance with workplace procedures.
  • Relevant hazard identification and risk elimination/control measures are applied and advised to associated personnel in accordance with workplace procedures.
  • Traffic management plan implementation is confirmed in accordance with workplace procedures.
  • Appropriate communication procedures are identified with associated personnel in accordance with workplace procedures.
  • All crane and lifting operations are confirmed to ensure relevant work area requirements are correct in accordance with a lift plan and workplace procedures.
  • Information required to ensure that lifting equipment and gear inspection, use, maintenance and storage complies with manufacturer requirements is obtained and interpreted.

02Prepare for work/task

  • Consultation with workplace personnel is established and maintained to ensure lift plan is clear and consistent with site requirements in accordance with a lift plan and workplace procedures.
  • Risk control measures for hazards identified are checked for implementation in accordance with the lift plan and safe work procedures
  • Mobile crane is accessed safely in accordance with manufacturer requirements and safe work procedures.
  • Pre-start mobile crane checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures.
  • Mobile crane is set up correctly with any lifting gear and stabilised as per the lift plan in accordance with relevant manufacturer requirements, including load chart/s and safe work procedures.
  • Fly jib is set up as required in accordance with specific manufacturer requirements and safe work procedures.
  • Operational checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures.
  • Crane logbook is checked to confirm current compliance, is correct for the crane type, is completed and signed and required rectifications have been signed off in accordance with manufacturer requirements and safe work procedures.
  • Weather and work environment conditions are assessed to determine any impact on mobile crane operations in accordance with manufacturer requirements and safe work procedures.
  • Weight of the load is confirmed.
  • Derated WLL of lifting equipment resulting from selected slinging techniques is calculated and confirmed as suitable to meet the requirements of the lift plan.
  • Suitable lifting points and slinging techniques are identified.
  • Lifting equipment and gear are confirmed as ready for safe use.
  • Load destination stability is confirmed ensuring it is able to bear the load and is prepared for safe access and landing.

03Perform work/task

  • Lifts are determined within the RC of the mobile crane in accordance with the load chart/s and lift plan.
  • Boom/jib and hook block are safely positioned over the load following directions from associated personnel in accordance with the lift plan and safe work procedures.
  • Main hook, including any lifting gear where required, are connected to the load and used safely in accordance with the lift plan, safe work procedures and manufacturer requirements.
  • Test lift is carried out in accordance with safe work procedures.
  • Loads are transferred using relevant crane movements and tag lines, as required, in accordance with lift plan and safe work procedures.
  • Load and crane movement is monitored constantly and crane is operated safely in accordance with lift plan and safe work procedures.
  • All required communication signals are correctly interpreted and followed whilst crane is operated in accordance with the lift plan and safe work procedures.
  • Load is lowered and landed safely in accordance with lift plan and safe work procedures.
  • Lifting gear is disconnected from load and crane is positioned safely and efficiently for next task in accordance with lift plan and safe work procedures.
  • Lifting equipment and gear are inspected for defects, and defective items are isolated, tagged and reported.

04Pack up

  • Crane boom/jib, lifting gear and associated equipment are stowed and secured as required in accordance with manufacturer requirements and safe work procedures.
  • Crane fly jib is removed to storage position and secured as required in accordance with manufacturer requirements and safe work procedures.
  • Relevant motion locks and brakes are applied as required in accordance with manufacturer requirements and safe work procedures.
  • Outriggers, plates and/or packing are stowed and secured in accordance with manufacturer requirements and safe work procedures.
  • Crane is shut down and secured to prevent unauthorised access/use in accordance with safe work procedures.
  • Shutdown crane checks are carried out in accordance with safe work procedures and manufacturer requirements.

Frequently Asked Questions

How long is a C2 crane licence valid for?

A C2 slewing mobile crane High Risk Work Licence is valid for 5 years from the date of issue. You will need to renew your licence with WorkSafe WA before it expires to continue operating.

What cranes can I operate with a C2 licence?

The C2 class High Risk Work Licence allows you to operate slewing mobile cranes with a maximum rated capacity of up to 20 tonnes. It also covers the lower classes: non-slewing mobile cranes (CN) and vehicle loading cranes (CV).

Are there any requirements to get a C2 licence?

You must be at least 18 years old to be issued a High Risk Work Licence in Western Australia, and you will need to provide evidence of identity as part of your WorkSafe application. No prior crane experience is required to enrol in the course, although a dogging licence is highly regarded in crane operation roles.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. Lunch and refreshments are not provided so we recommend bringing your own.