Need on-site training, VOCs, or alternative dates?

Online Enquiry

Forklift Licence & Ticket Course in Perth (LF)

TLILIC0003 Licence to Operate a Forklift Truck

Course cost
$500*
Course duration
2 Days
Next available public session
23 Nov
CTF

Rebate available, save $350 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Forklift training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This unit specifies the skills and knowledge required to operate a forklift truck safely in accordance with all relevant legislative requirements. Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck. A person performing this work is required to hold a forklift truck High Risk Work Licence (HRWL).

  • WorkSafe fee and processing included
  • 2-day comprehensive training
  • Training and assessment for the forklift (LF) high risk work licence
  • Cockburn Central location
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training Fund

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must be 18 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence) or at least THREE secondary documents (birth certificate, Medicare, utility bill, not older than 12 months).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

23 upcoming sessions · TLILIC0003

to 24 Nov 2026 · 2 days

$500.00

2 left
Time
08:00 – 16:00
Location
Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course
Licence to Operate a Forklift TruckTLILIC0003 · ID 46146
Enrol myselfEnrol employee(s)
to 01 Dec 2026 · 2 days

$500.00

5 left
Time
08:00 – 16:00
Location
Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course
Licence to Operate a Forklift TruckTLILIC0003 · ID 46147
Enrol myselfEnrol employee(s)
to 08 Dec 2026 · 2 days

$500.00

6 left
Time
08:00 – 16:00
Location
Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course
Licence to Operate a Forklift TruckTLILIC0003 · ID 46148
Enrol myselfEnrol employee(s)
to 15 Dec 2026 · 2 days

$500.00

6 left
Time
08:00 – 16:00
Location
Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course
Licence to Operate a Forklift TruckTLILIC0003 · ID 46149
Enrol myselfEnrol employee(s)
to 12 Jan 2027 · 2 days

$500.00

6 left
Time
08:00 – 16:00
Location
Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course
Licence to Operate a Forklift TruckTLILIC0003 · ID 50240
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Licence to Operate a Forklift Truck - TLILIC0003

Objectives

What you will be assessed on across 4 unit elements.

01Plan work/task

  • Task requirements are identified from work orders or equivalent and confirmed with relevant people and site inspection is conducted in accordance with workplace procedures
  • Work area operating surface is assessed to determine suitability for operational use of forklift truck in accordance with workplace procedures
  • Suitability of forklift truck and attachment working load limit (WLL) is determined for the load/s and work/task requirements in accordance with manufacturer requirements and workplace procedures
  • Working area is inspected and appropriate paths for operating the forklift truck and moving and placing load/s in work area are assessed and managed in accordance with workplace procedures
  • Hazard and risk control measures are identified and reported to relevant person/s in accordance with workplace procedures
  • Traffic management plan implementation is confirmed in accordance with workplace procedures
  • Appropriate communication procedures are identified with relevant people in accordance with workplace procedures
  • All work is confirmed to ensure coverage of work/task requirements for the relevant work area is in accordance with workplace procedures

02Prepare for work/task

  • Consultation with workplace person/s is maintained to ensure workplan is clear and consistent with site requirements in accordance with safe work procedures
  • Weather and work environmental conditions are assessed to determine any impact on forklift truck operations in accordance with manufacturer requirements and safe work procedures
  • Risk control measures for hazards identified are checked for implementation in accordance with safe work procedures
  • Forklift truck is accessed in a safe manner in accordance with manufacturer requirements and workplace procedures
  • Forklift truck logbook is checked in accordance with manufacturer, regulatory requirements and safe work procedures
  • Pre-start checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with safe work procedures and manufacturer requirements
  • Forklift truck is set up correctly with any relevant attachments as per work plan in accordance with relevant manufacturer requirements including data plate and safe work procedures
  • Operational checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures
  • Hazard and risk control measures are checked for implementation and communicated to people in the work area in accordance with safe work procedures

03Perform work/task

  • Weight and positioning of load is assessed to ensure compliance with forklift truck data plate requirements and in accordance with safe work procedures
  • Forklift truck is operated safely in accordance with manufacturer requirements and safe work procedures
  • Loads are monitored constantly when lifting, moving, lowering and placing to ensure stability of load and avoidance of hazards in accordance with safe work procedures
  • Unplanned and unsafe situations are responded to in accordance with safe work procedures
  • Loads are picked up, transported and placed using all forklift truck movements in accordance with safe work procedures
  • Forklift truck is parked, switched off and isolated appropriately in accordance with manufacturer requirements and safe work procedures

04Pack Up

  • Forklift truck shutdown procedures are carried out in accordance with manufacturer requirements and safe work procedures
  • Forklift truck is secured to prevent unauthorised access/use in accordance with safe work procedures

Frequently Asked Questions

How long is a forklift licence valid for?

A forklift High Risk Work Licence (HRWL) is valid for 5 years from the date of issue. You will need to renew your licence with WorkSafe WA before it expires to continue operating a forklift.

Are there any requirements to get a forklift licence?

You must be at least 18 years old to be issued a High Risk Work Licence in Western Australia, and you will need to provide evidence of identity as part of your WorkSafe application. No prior forklift experience is required to enrol in the course.

Is the WorkSafe licence fee included in the course price?

Yes. The WorkSafe application fee and processing are included in the course price, so once you successfully complete your training and assessment, STES handles the paperwork for your High Risk Work Licence application.

Does TLILIC0003 cover order-picking forklifts?

No. TLILIC0003 covers counterbalance forklift trucks (LF class). Order-picking forklift trucks, where the operator's controls elevate with the load, require a separate LO class High Risk Work Licence.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. Lunch and refreshments are not provided so we recommend bringing your own.