Need on-site training, VOCs, or alternative dates?

Online Enquiry

Intermediate Rigging Licence & Ticket Course in Perth (RI)

CPCCLRG3002 Licence to Perform Rigging Intermediate Level

Course cost
$1300*
Course duration
3 Days
Next available public session
07 Dec
CTF

Rebate available, save $910 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Rigging intermediate training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This unit specifies the skills and knowledge required to safely perform intermediate rigging work. Riggers use mechanical load shifting equipment and associated gear to move, place or secure loads, including plant, equipment or members of a building or structure. Riggers ensure the stability of those members and set up and dismantle cranes and hoists. A person performing this work is required to hold a high risk work licence (HRWL).

  • WorkSafe fee and processing included
  • 3-day comprehensive training
  • Training and assessment for the intermediate rigging (RI) high risk work licence
  • Multiple Perth locations
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training Fund

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must hold a current CPCCLDG3001 Licence to perform dogging.
  • Must hold a current CPCCLRG3001 Licence to perform rigging basic level.
  • Must be 18 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence) or at least THREE secondary documents (birth certificate, Medicare, utility bill, not older than 12 months).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

5 upcoming sessions · CPCCLRG3002

to 10 Dec 2026 · 4 days

$1,300.00

6 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Licence to Perform Rigging Intermediate LevelCPCCLRG3002 · ID 48126
Enrol myselfEnrol employee(s)
to 12 Feb 2027 · 4 days

$1,300.00

8 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Licence to Perform Rigging Intermediate LevelCPCCLRG3002 · ID 50483
Enrol myselfEnrol employee(s)
to 12 Mar 2027 · 4 days

$1,300.00

8 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Licence to Perform Rigging Intermediate LevelCPCCLRG3002 · ID 50484
Enrol myselfEnrol employee(s)
to 09 Apr 2027 · 4 days

$1,300.00

8 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Licence to Perform Rigging Intermediate LevelCPCCLRG3002 · ID 50485
Enrol myselfEnrol employee(s)
to 07 May 2027 · 4 days

$1,300.00

8 left
Time
08:00 – 16:00
Location
27 Sphinx WayBibra Lake WA 6163
Course
Licence to Perform Rigging Intermediate LevelCPCCLRG3002 · ID 50486
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Licence to Perform Rigging Intermediate Level - CPCCLRG3002

Objectives

What you will be assessed on across 5 unit elements.

01Plan task

  • Review task instructions, consult with relevant persons to seek clarification as required, and obtain relevant workplace information.
  • Obtain and interpret information, including safe work method statements (SWMSs), required to ensure that activities are performed in compliance with workplace-specific and safe work requirements.
  • Obtain and interpret information required to ensure that equipment inspection, use, maintenance and storage complies with manufacturer requirements.
  • Identify workplace and task-specific hazards and determine required risk controls and safety measures and equipment, including signs and barricades, personal protective equipment (PPE), and fall prevention and fall arrest equipment.
  • Identify methods of moving and placing tools, equipment and materials to minimise the risk of falling objects, to avoid inappropriate carrying on ladders and to minimise hazardous manual tasks.
  • Identify required rigging equipment and associated gear.
  • Calculate loads associated with mechanical load shifting equipment and associated gear required to erect and dismantle structures and plant.
  • Establish required communication methods with plant operator.

02Select and inspect equipment

  • Select risk controls and equipment, including fall prevention and fall arrest equipment, and check that it is working and fit for purpose.
  • Select and check PPE.
  • Select lifting equipment and gear, inspect for defects, and isolate, tag out, report and record defective items.
  • Select communication equipment and check that it is working and fit for use.

03Set up task

  • Establish and maintain communication with relevant persons to ensure lift plan and risk controls are communicated clearly, including any impact on other workplace activities.
  • Ensure risk controls and safety measures and equipment have been put in place, including the fitting, adjusting and anchoring of fall protection equipment.
  • Consult with relevant persons to ensure that ground and foundation have been assessed as suitable for task.
  • Consult with relevant persons to ensure that the structure has been assessed as suitable for load bearing task.

04Undertake intermediate rigging activities

  • Erect and dismantle all structures and plant while maintaining stability, in accordance with workplace and manufacturer requirements.
  • Conduct a multiple-crane lift.
  • Erect and dismantle one of the following: a tower crane section or a crane lattice boom section, or a fly jib on a mobile slewing or a non-guyed tower crane.
  • Lift and install a series of tilt-up concrete panels.
  • Remove a concrete-encased structural steel column and beam.

05Complete task

  • Remove excess materials from work area.
  • Inspect structures, plant, equipment and gear for defects, and isolate, tag out and report defective items.
  • Store lifting equipment and gear in accordance with workplace requirements.
  • Remove risk controls and safety measures and equipment.

Frequently Asked Questions

How long is a rigging intermediate licence valid for?

A rigging intermediate (RI class) High Risk Work Licence is valid for 5 years from the date of issue. You will need to renew your licence with WorkSafe WA before it expires to continue performing rigging work.

What are the prerequisites for rigging intermediate?

You must hold both a CPCCLDG3001 dogging (DG class) and a CPCCLRG3001 rigging basic (RB class) High Risk Work Licence before you can obtain your rigging intermediate licence. STES runs both prerequisite courses if you still need them.

What can I do with a rigging intermediate licence?

The rigging intermediate licence covers all basic rigging work plus more complex tasks such as multiple-crane lifts, erecting and dismantling tower crane sections and crane lattice boom sections, installing tilt-up concrete panels, and removing concrete-encased structural steel. The next step in the pathway is the rigging advanced licence.

Is the WorkSafe licence fee included in the course price?

Yes. The WorkSafe application fee and processing are included in the course price, so once you successfully complete your training and assessment, STES handles the paperwork for your High Risk Work Licence application.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), your dogging and rigging basic High Risk Work Licences, appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. Lunch and refreshments are not provided so we recommend bringing your own.