Need on-site training, VOCs, or alternative dates?

Online Enquiry

Dogging Licence & Ticket Course in Perth (DG)

CPCCLDG3001 Licence to Perform Dogging

Course cost
$1200*
Course duration
4 Days
Next available public session
14 Dec
CTF

Rebate available, save $840 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Dogging training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This unit specifies the skills and knowledge required to safely perform dogging work. Dogging consists of the application of slinging techniques to move a load, including the selection and inspection of lifting gear, and the directing of a plant operator in the movement of a load when the load is out of sight of the operator. A person performing this work is required to hold a high risk work licence (HRWL).

  • WorkSafe fee and processing included
  • 4-day comprehensive training
  • Training and assessment for the dogging (DG) high risk work licence
  • Multiple Perth locations
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training Fund

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must be 18 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence) or at least THREE secondary documents (birth certificate, Medicare, utility bill, not older than 12 months).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

11 upcoming sessions · CPCCLDG3001

to 17 Dec 2026 · 4 days

$1,200.00

3 left
Time
08:00 – 16:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Licence to Perform DoggingCPCCLDG3001 · ID 45864
Enrol myselfEnrol employee(s)
to 14 Jan 2027 · 4 days

$1,200.00

6 left
Time
08:00 – 16:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Licence to Perform DoggingCPCCLDG3001 · ID 50351
Enrol myselfEnrol employee(s)
to 30 Jan 2027 · 4 days

$1,200.00

6 left
Time
08:00 – 16:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Licence to Perform DoggingCPCCLDG3001 · ID 50352
Enrol myselfEnrol employee(s)
to 11 Feb 2027 · 4 days

$1,200.00

6 left
Time
08:00 – 16:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Licence to Perform DoggingCPCCLDG3001 · ID 50353
Enrol myselfEnrol employee(s)
to 25 Feb 2027 · 4 days

$1,200.00

6 left
Time
08:00 – 16:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Licence to Perform DoggingCPCCLDG3001 · ID 50354
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Licence to Perform Dogging - CPCCLDG3001

Objectives

What you will be assessed on across 5 unit elements.

01Plan task

  • Review task instructions, consult with relevant persons to seek clarification as required, and obtain relevant workplace information.
  • Obtain and interpret information, including safe work method statements (SWMSs), required to ensure that activities are performed in compliance with workplace-specific and safe work requirements.
  • Obtain and interpret information required to ensure that equipment inspection, use, maintenance and storage complies with manufacturer requirements.
  • Identify workplace and task-specific hazards and determine required risk controls and safety measures and equipment, including signs and barricades, personal protective equipment (PPE), and fall prevention and fall arrest equipment.
  • Calculate load weight, dimensions and centre of gravity.
  • Determine lifting and slinging points.
  • Calculate derated working load limit (WLL) of lifting equipment resulting from selected slinging techniques.
  • Establish required communication methods with plant operator.

02Select and inspect equipment

  • Select risk controls and equipment, including fall prevention and fall arrest equipment, and check that it is working and fit for purpose.
  • Select and check PPE.
  • Select lifting equipment and gear, inspect for defects, and isolate, tag out, report and record defective items.
  • Select communication equipment and check that it is working and fit for use.

03Set up task

  • Establish and maintain communication with relevant persons to ensure lift plan and risk controls are communicated clearly, including any impact on other workplace activities.
  • Ensure risk controls and safety measures and equipment have been put in place.
  • Prepare lifting equipment and gear for safe use.
  • Consult with relevant persons to ensure that the load destination is stable, able to bear the load and prepared for safe access and landing.
  • Attach and secure lifting equipment and gear to the plant-designated lifting point.

04Perform task

  • Direct plant designated lifting point/hook, over the load's centre of gravity.
  • Attach and secure lifting equipment and gear to the load using slinging techniques.
  • Attach and secure tag line as required to guide the load.
  • Use signals and radio communication methods to direct the load movement, both in and out of sight of the plant operator.
  • Conduct test lift to check the security of the slings and the stability of the load, lifting equipment and gear.
  • Direct the movement of the load in accordance with lift plan, including lowering and landing.
  • Disconnect lifting gear from the load and direct the positioning of crane or hoist for next task.

05Pack up and clean up

  • Remove excess materials from work area.
  • Inspect lifting equipment and gear for defects, and isolate, label and report defective items.
  • Store lifting equipment and gear in accordance with workplace requirements.
  • Remove risk controls and safety measures and equipment.

Frequently Asked Questions

How long is a dogging licence valid for?

A dogging (DG class) High Risk Work Licence is valid for 5 years from the date of issue. You will need to renew your licence with WorkSafe WA before it expires to continue performing dogging work.

What is the difference between dogging and rigging?

Dogging covers slinging techniques to move a load, selecting and inspecting lifting gear, and directing a crane or plant operator, including when the load is out of the operator's sight. Rigging builds on dogging and covers moving, placing and securing loads using mechanical load shifting equipment, and erecting and dismantling structures. A dogging licence is a prerequisite for the rigging basic licence.

Are there any requirements to get a dogging licence?

You must be at least 18 years old to be issued a High Risk Work Licence in Western Australia, and you will need to provide evidence of identity as part of your WorkSafe application. No prior experience is required to enrol in the course.

Is the WorkSafe licence fee included in the course price?

Yes. The WorkSafe application fee and processing are included in the course price, so once you successfully complete your training and assessment, STES handles the paperwork for your High Risk Work Licence application.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. Lunch and refreshments are not provided so we recommend bringing your own.