Need on-site training, VOCs, or alternative dates?

Online Enquiry

Working at Heights Refresher in Perth

RIIWHS204E Work Safely at Heights Refresher

Course cost
$220*
Course duration
4 Hours
Short notice & on-site
Flexible

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Working at Heights refresher training course Perth
ON THIS PAGE:OverviewRequirementsEnquireCertificationObjectivesFAQs

Overview

A condensed, in-person refresher of the nationally recognised RIIWHS204E Work Safely at Heights unit, delivered over four hours of combined theory and hands-on practical training and assessment. It is designed for workers who already hold, or have recently held, the unit and need to renew their skills and currency. This is the full unit of competency delivered as a refresher, not a credit transfer or recognition of prior learning: you complete and are assessed against the full RIIWHS204E unit in a single shorter session, and receive the same nationally recognised Statement of Attainment.

  • Just 4 hours: combined theory and hands-on practical
  • Full unit of competency, not a credit transfer
  • Same-day nationally recognised Statement of Attainment
  • Short notice and on-site options across WA
Nationally Recognised TrainingTraining Accreditation Council WA

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must hold a current Evidence of prior competency in RIIWHS204E Work Safely at Heights gained within the last three years: a copy of your USI transcript showing the unit, or a previous Statement of Attainment.
  • Must hold a current A valid Unique Student Identifier (USI).
  • Must be 16 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Enquire about this refresher

Refreshers run on a flexible, short-notice basis at our Bibra Lake and Cockburn Central centres, or on-site across WA. Pick a preferred date and time below and the team will get back to you to confirm, usually within the hour.

  • Bring a copy of your USI transcript, or a previous Statement of Attainment, showing competency in RIIWHS204E within the last three years.
  • This is the full unit of competency delivered as a refresher, not a credit transfer.
  • Prefer to talk? Call (08) 9418 8555.

Request this refresher

Pick a preferred date and time and send us your details. The team will get back to you to confirm, usually within the hour.

Preferred date

We use these details to respond to your request. See our privacy policy.

Prefer to talk? Call (08) 9418 8555

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Work Safely at Heights Refresher - RIIWHS204E

Objectives

What you will be assessed on across 5 unit elements.

01Identify work requirements

  • Obtain, interpret and confirm work requirements.
  • Access, interpret and apply documentation required to work safely at heights.
  • Identify and address potential risks, hazards and environmental issues, and implement control measures according to workplace procedures.
  • Inspect worksite to determine layout and physical condition, condition of structures and equipment requirements.
  • Adhere to legislative requirements.
  • Select appropriate plant, tools and equipment for the job, inspect them for serviceability and rectify or report any faults prior to commencement of work activities.
  • Select and wear personal protective equipment appropriate for work activities.
  • Obtain and interpret emergency procedures, and be prepared for emergency situations.

02Identify work procedures and instructions

  • Consult with relevant personnel to select materials, tools and equipment required for the work activities.
  • Inspect and install fall protection and perimeter protection equipment.
  • Identify methods of moving tools and equipment to the work area according to workplace procedures.
  • Ensure the safety system has been installed according to workplace procedures.
  • Select and install appropriate signs and barricades according to workplace procedures.

03Access and install equipment

  • Consult with relevant personnel to ensure anchor fall protection and associated equipment is fitted and adjusted according to workplace procedures.
  • Ensure all required equipment is installed according to workplace procedures.
  • Access work area for people, tools and equipment according to workplace procedures.
  • Locate tools and materials to eliminate or minimise the risk of items being knocked down.

04Perform work at heights

  • Check access from ground to work area and ensure it is safe according to workplace procedures.
  • Keep fall equipment in place and adjusted appropriately for movement during work.
  • Undertake manual handling of materials and equipment according to workplace procedures.
  • Locate materials and equipment ensuring that they are safely secured and distributed according to workplace procedures.
  • Check safety system periodically for compliance.
  • Monitor risk control measures to ensure that they are effective and appropriate according to workplace procedures.
  • Reassess risk control measures, as required, in accordance with workplace procedures and undertake alterations.

05Clean up work area

  • Consult with relevant personnel to ensure safety system is dismantled and removed according to workplace procedures.
  • Clear work area and dispose of materials.
  • Clean and maintain the plant and equipment, inspect to ensure serviceability and rectify or report any faults or issues to relevant personnel.
  • Process written maintenance records according to workplace procedures.

Frequently Asked Questions

What is the difference between the refresher and the full Working at Heights course?

The refresher is a condensed four-hour session (combined theory and hands-on practical) for people who already hold, or have recently held, RIIWHS204E. You still complete and are assessed against the full unit of competency, so you receive the same nationally recognised Statement of Attainment, just in a shorter session than the full training day.

Am I eligible for the refresher?

You are eligible if you can show prior competency in RIIWHS204E gained within the last three years. Bring a copy of your USI transcript showing the unit, or a previous Statement of Attainment. You will also need a valid Unique Student Identifier (USI). If your last competency is older than three years, we recommend the full course.

Is this a credit transfer or recognition of prior learning (RPL)?

No. This is the full unit of competency delivered as a refresher, not a credit transfer or RPL. You complete the theory and the hands-on practical assessment on the day and are assessed against the current RIIWHS204E unit.

How long does the refresher take?

About four hours, combining theory and hands-on practical training and assessment, delivered in person at our Bibra Lake or Cockburn Central centres (or on-site by arrangement).

Is the certificate nationally recognised?

Yes. On successful completion you receive a nationally recognised Statement of Attainment for RIIWHS204E Work Safely at Heights, the same qualification issued for the full course.

What do I need to bring on the day?

Bring valid photo ID, your USI transcript or a previous Statement of Attainment as evidence of prior competency, and appropriate clothing including long pants and closed-toe footwear. All harnesses, lanyards and fall-arrest equipment are provided by STES.