Advanced Rigging Licence & Ticket Course in Perth (RA)

CPCCLRG4001 Licence to Perform Rigging Advanced Level

Course cost: $1300*
Course duration: 4 Days
Next available public session: View all dates

CTF

Rebate available, save $910 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book now Explore the course

ON THIS PAGE:Overview Requirements Available Sessions Certification Objectives FAQs

Overview

This unit specifies the skills and knowledge required to safely perform advanced rigging work. Riggers use mechanical load shifting equipment and associated gear to move, place or secure loads, including plant, equipment or members of a building or structure. Riggers ensure the stability of those members and set up and dismantle cranes and hoists. A person performing this work is required to hold a high risk work licence (HRWL).

WorkSafe fee and processing included
4-day comprehensive training
Training and assessment for the advanced rigging (RA) high risk work licence
Multiple Perth locations

Requirements for Training

Please ensure you meet these requirements before booking.

Must hold a current CPCCLDG3001 Licence to perform dogging.
Must hold a current CPCCLRG3001 Licence to perform rigging basic level.
Must hold a current CPCCLRG3002 Licence to perform rigging intermediate level.
Must be 18 years or older.
Basic English reading skills.
Physical ability for practical exercises.
Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence) or at least THREE secondary documents (birth certificate, Medicare, utility bill, not older than 12 months).
Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Course cost

$1300

per person · GST not applicable

What's included

Training & assessment$1200.00

WorkSafe licence & admin$100.00

Total$1300.00

The WorkSafe fee covers your High Risk Work Licence application, admin processing, passport photo, and delivery of your paperwork to WorkSafe WA in Cannington.

Please note: some providers appear cheaper by charging this fee separately afterwards. Our advertised price already includes it.

CTF rebate available - save $910

View all sessions →

No public sessions yet. Enquire for a date →

Need a VOC? Request a date →

Need a different date or on-site training? Get in touch →

How the CTF rebate works +

Course fee$1300.00

− CTF rebate−$910.00

Your price$390.00

Full fee payable at booking. Claim the rebate directly with the CTF after completing the course. Check eligibility →

Available Sessions

0 upcoming sessions · CPCCLRG4001

No public sessions are scheduled right now

We can usually arrange a date for you. Call (08) 9418 8555 or email info@stes.com.au.

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Licence to Perform Rigging Advanced Level - CPCCLRG4001

Objectives

What you will be assessed on across 5 unit elements.

01Plan task

Review task instructions, consult with relevant persons to seek clarification as required, and obtain relevant workplace information.
Obtain and interpret information, including safe work method statements (SWMSs), required to ensure that activities are performed in compliance with workplace-specific and safe work requirements.
Obtain and interpret information required to ensure that equipment inspection, use, maintenance and storage complies with manufacturer requirements.
Identify workplace and task-specific hazards and determine required risk controls and safety measures and equipment, including signs and barricades, personal protective equipment (PPE), and fall prevention and fall arrest equipment.
Identify methods of moving and placing tools, equipment and materials to minimise the risk of falling objects, to avoid inappropriate carrying on ladders and to minimise hazardous manual tasks.
Identify required rigging equipment and associated gear.
Calculate loads associated with mechanical load shifting equipment and associated gear required to erect and dismantle structures and plant.
Establish required communication methods with plant operator.

02Select and inspect equipment

Select risk controls and equipment, including fall prevention and fall arrest equipment, and check that it is working and fit for purpose.
Select and check PPE.
Select lifting equipment and gear, inspect for defects, and isolate, tag out, report and record defective items.
Select communication equipment and check that it is working and fit for use.

03Set up task

Establish and maintain communication with relevant persons to ensure lift plan and risk controls are communicated clearly, including any impact on other workplace activities.
Ensure risk controls and safety measures and equipment have been put in place, including the fitting, adjusting and anchoring of fall protection equipment.
Consult with relevant persons to ensure that ground and foundation have been assessed as suitable for task.
Consult with relevant persons to ensure that the structure has been assessed as suitable for load bearing task.

04Undertake advanced rigging activities

Erect and dismantle all structures and plant while maintaining stability, in accordance with workplace and manufacturer requirements.
Erect gin poles or sheer legs, operate winch to move load, and dismantle.
Erect flying fox or cable way, operate to move a load, and dismantle.
Erect guyed derrick, operate to move a load, and dismantle.
Erect, operate and dismantle suspended scaffold.
Install and remove fabricated hung scaffold.

05Complete task

Remove excess materials from work area.
Inspect structures, plant, equipment and gear for defects, and isolate, tag out and report defective items.
Store lifting equipment and gear in accordance with workplace requirements.
Remove risk controls and safety measures and equipment.

Frequently Asked Questions

How long is a rigging advanced licence valid for?

A rigging advanced (RA class) High Risk Work Licence is valid for 5 years from the date of issue. You will need to renew your licence with WorkSafe WA before it expires to continue performing rigging work.

What are the prerequisites for rigging advanced?

You must hold a CPCCLDG3001 dogging (DG class), a CPCCLRG3001 rigging basic (RB class) and a CPCCLRG3002 rigging intermediate (RI class) High Risk Work Licence before you can obtain your rigging advanced licence. STES runs all three prerequisite courses if you still need them.

What can I do with a rigging advanced licence?

The rigging advanced licence is the highest level of rigging qualification. It covers all basic and intermediate rigging work plus advanced tasks such as erecting gin poles and sheer legs, flying foxes and cable ways, guyed derricks, and suspended and fabricated hung scaffolds.

Is the WorkSafe licence fee included in the course price?

Yes. The WorkSafe application fee and processing are included in the course price, so once you successfully complete your training and assessment, STES handles the paperwork for your High Risk Work Licence application.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), your dogging, rigging basic and rigging intermediate High Risk Work Licences, appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. Lunch and refreshments are not provided so we recommend bringing your own.