Load Restraint Ticket Course in Perth

TLIA1001 & TLID0015 Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)

Course cost: $350*
Course duration: 1 Day
Next available public session: 04 Dec

CTF

Rebate available, save $245 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book now Explore the course

ON THIS PAGE:Overview Requirements Available Sessions Certification Objectives FAQs

Overview

This unit involves the skills and knowledge required to load and unload goods and/or cargo. It includes loading and unloading goods and cargo, securing and protecting a load and completing all required documentation in accordance with relevant state or territory roads and traffic authority regulations and permit requirements.

Two units of competency in one day
Covers the Australian Dangerous Goods (ADG) Code
Practical cargo securing experience
On-site training available

Requirements for Training

Please ensure you meet these requirements before booking.

Must be 16 years or older.
Basic English reading skills.
Physical ability for practical exercises.
Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence).
Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Course cost

$350

per person · GST not applicable

CTF rebate available - save $245

Next session

4 December 2026

08:00 · Cockburn Central

Book this session - 04 Dec

View all sessions →

Need a different date or on-site training? Get in touch →

How the CTF rebate works +

Course fee$350.00

− CTF rebate−$245.00

Your price$105.00

Full fee payable at booking. Claim the rebate directly with the CTF after completing the course. Check eligibility →

Available Sessions

3 upcoming sessions · TLIA1001 & TLID0015

Course	Date	Time	Location	Places	Price
Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)TLIA1001 & TLID0015 · ID 51238	04 Dec 2026Friday	08:00 – 16:00	Unit 2, 451 Yangebup RoadCockburn Central WA 6164	5 left	$350.00	Enrol myself Enrol employee(s)
Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)TLIA1001 & TLID0015 · ID 51237	11 Dec 2026Friday	08:00 – 16:00	Unit 2, 451 Yangebup RoadCockburn Central WA 6164	8 left	$350.00	Enrol myself Enrol employee(s)
Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)TLIA1001 & TLID0015 · ID 51236	15 Dec 2026Tuesday	08:00 – 16:00	Unit 2, 451 Yangebup RoadCockburn Central WA 6164	8 left	$350.00	Enrol myself Enrol employee(s)

04 Dec 2026Friday

$350.00

5 left

Time: 08:00 – 16:00
Location: Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course: Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)TLIA1001 & TLID0015 · ID 51238

Enrol myself Enrol employee(s)

11 Dec 2026Friday

$350.00

8 left

Time: 08:00 – 16:00
Location: Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course: Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)TLIA1001 & TLID0015 · ID 51237

Enrol myself Enrol employee(s)

15 Dec 2026Tuesday

$350.00

8 left

Time: 08:00 – 16:00
Location: Unit 2, 451 Yangebup RoadCockburn Central WA 6164
Course: Secure Cargo & Load and Unload Goods/Cargo (Load Restraint)TLIA1001 & TLID0015 · ID 51236

Enrol myself Enrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Secure Cargo & Load and Unload Goods/Cargo (Load Restraint) - TLIA1001 & TLID0015

Objectives

What you will be assessed on across 7 unit elements.

01TLIA1001: Prepare to secure cargo/containers

Work area is prepared and maintained, in accordance with national standards, safety codes and workplace procedures.
Unsafe work practices and/or equipment are reported to appropriate personnel.
Appropriate protective clothing, equipment and fittings are selected.
Form work is erected where no lashing points exist.
Lashing plan is read and interpreted.

02TLIA1001: Lash and unlash cargo

Work is conducted, in accordance with industry standards, statutory requirements, safety codes, site operating requirements and any special cargo requirements.
Lashing points are identified and appropriate fittings and lashing equipment are used for each lashing point.
Cargo is lashed and secured to lashing points, ensuring the correct spread of lashings and that lashings are secured, attached and tensioned.
Tensioners are securely fastened.
When unlashing, fittings are released, disconnected and removed from the cargo.
Lashing equipment is placed in designated storage areas or cleared from work area
No injury to personnel or damage to machinery or cargo during lashing/unlashing operations is ensured.
Lashing is completed, in accordance with lashing plan

03TLIA1001: Protect cargo from weather

Cargo is covered/uncovered safely ensuring appropriate covering and lashing, no injury to personnel or damage to cargo or equipment.
Work is conducted, in accordance with the requirements of national standards, safety codes of practice and workplace procedures.

04TLIA1001: Pack and unpack cargo

Damaged cargo is identified and reported, in accordance with enterprise procedures.
Cargo is sorted and stacked prior to packing or after unpacking, ensuring the stack is in the correct location, in accordance with national standards, safety codes, and workplace procedures.
Cargo is identified through the interpretation of marks or numbers.
Tight stow of cargo is maintained.
Cargo is handled ensuring no injury to personnel or damage to cargo or equipment

05TLID0015: Load and unload goods/cargo

Load characteristics are identified and taken into account when determining appropriate loading and unloading workplace procedures.
Job hazards are identified and required actions taken to minimise, control or eliminate identified hazards.
Dangerous or hazardous goods are identified and handled in accordance with the current Australian Dangerous Goods (ADG) Code and other relevant regulations and permit requirements, as required.
Load is packed and unpacked to make safe and effective use of available spaces.
Goods and/or cargo are loaded and unloaded in accordance with relevant mass and loading regulations and workplace procedures.
Lifting aids and appliances are selected and used to aid loading procedures in accordance with workplace procedures and safety legislation
Unloading activities are conducted in a safe and efficient manner taking into account suitable locations, stowage, safe use of equipment and balance of remaining load
Goods requiring special handling and/or documentation are identified, and workplace procedures are followed
Relocated material is restacked appropriate for transport method, safe height, weight loading, size and crushability of goods

06TLID0015: Secure, check and protect load

Load distribution is checked to ensure it is even, legal and within safe working capacity.
Load is checked to ensure dangerous goods and hazardous substances are appropriately segregated in accordance with current ADG Code.
Load is secured using correct load restraint and protection equipment for different loads, carrying and storage conditions.
Load is protected in accordance with legal and workplace safety requirements.

07TLID0015: Complete documentation

Load is inspected and checked for security to travel in accordance with relevant regulations and permit requirements and current ADG Code, as required.
All required goods documentation is completed in accordance with workplace requirements including current ADG Code, as required.

Frequently Asked Questions

Do I receive two certifications from the load restraint course?

Yes. On successful completion you will receive a Statement of Attainment covering both TLIA1001 Secure Cargo and TLID0015 Load and Unload Goods/Cargo, two nationally recognised units of competency from a single day of training.

How long is a load restraint ticket valid for?

Your Statements of Attainment do not have a legislated expiry date, however most employers in Western Australia require refresher training every 2–3 years to ensure your skills and knowledge remain current. Always check your employer's specific site requirements before commencing work.

Who needs load restraint training?

Load restraint training is designed for anyone who loads, unloads, or secures goods for transport, including truck drivers, transport and logistics workers, warehouse staff, and site personnel responsible for loading vehicles. It covers securing and protecting loads in accordance with mass and loading regulations and the Australian Dangerous Goods (ADG) Code.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. All lashing and restraint equipment is provided by STES. Lunch and refreshments are not provided so we recommend bringing your own.