Need on-site training, VOCs, or alternative dates?

Online Enquiry

Scissor Lift Yellow Card® (EWP) Ticket Course in Perth

RIIHAN301E Operate Elevating Work Platform (Scissor Lift)

Course cost
$350*
Course duration
1 Day
Next available public session
17 Nov
CTF

Rebate available, save $245 on this course

*No GST Applicable. Prices may vary based on delivery location.

Book nowExplore the course
Scissor lift training course Perth
ON THIS PAGE:OverviewRequirementsAvailable SessionsCertificationObjectivesFAQs

Overview

This unit describes the skills and knowledge required to operate an elevating work platform (scissor lift) at any height.

  • One-day certification
  • Covers scissor lifts at any height
  • Multiple Perth locations
  • On-site training available
Nationally Recognised TrainingTraining Accreditation Council WAConstruction Training FundEWPA Yellow Card accredited training

Requirements for Training

Please ensure you meet these requirements before booking.

  • Must be 16 years or older.
  • Basic English reading skills.
  • Physical ability for practical exercises.
  • Upon entering training, proof of identity must be established. You must provide ONE primary document (passport or driver's licence).
  • Appropriate attire: Wear long pants and a long shirt, preferably high-visibility, along with steel-capped boots.

Available Sessions

23 upcoming sessions · RIIHAN301E

Tuesday

$350.00

5 left
Time
08:00 – 15:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Operate Elevating Work Platform (Scissor Lift)RIIHAN301E · ID 47659
Enrol myselfEnrol employee(s)
Tuesday

$350.00

4 left
Time
08:00 – 15:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Operate Elevating Work Platform (Scissor Lift)RIIHAN301E · ID 47660
Enrol myselfEnrol employee(s)
Tuesday

$350.00

6 left
Time
08:00 – 15:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Operate Elevating Work Platform (Scissor Lift)RIIHAN301E · ID 47661
Enrol myselfEnrol employee(s)
Tuesday

$350.00

6 left
Time
08:00 – 15:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Operate Elevating Work Platform (Scissor Lift)RIIHAN301E · ID 50452
Enrol myselfEnrol employee(s)
Tuesday

$350.00

6 left
Time
08:00 – 15:00
Location
25 Blackly RowCockburn Central WA 6164
Course
Operate Elevating Work Platform (Scissor Lift)RIIHAN301E · ID 50453
Enrol myselfEnrol employee(s)

Certification

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised and issued by Skills Training & Engineering Services (STES) (RTO: 50091).

Operate Elevating Work Platform (Scissor Lift) - RIIHAN301E

Objectives

What you will be assessed on across 3 unit elements.

01Plan and prepare for operating an elevating work platform

  • Access, interpret and apply elevating work platforms documentation for allocated job and ensure work activity is compliant with site policies and procedures to perform the work as planned.
  • Obtain, interpret, clarify and confirm work requirements.
  • Confirm hazards, environmental issues, and risks, and implement required control measures according to site risk management plans and processes.
  • Select and wear personal protective equipment required for work activities.
  • Obtain and interpret emergency procedures for elevating work platform in preparation for emergencies and incidents.
  • Coordinate and communicate planned activities with others at the site prior to commencing work activity.

02Operate elevating work platform in line with established requirements to complete work activity

  • Carry out pre-start and post-start inspections and checks in line with Australian Standards and workplace procedures.
  • Identify faults or defects and report within scope of own responsibility and according to workplace procedures.
  • Apply site specific requirements for relocating the elevating work platform to work site.
  • Stabilise or position elevating work platform according to work site conditions and requirements.
  • Ensure work site is clear of personnel and other potential hazards.
  • Place any tools and equipment required to perform work activity into bucket or platform according to workplace procedures.
  • Operate elevating work platform within performance capabilities of brand and model of elevating work platform.
  • Use manufacturer approved safety devices fitted to the machine in line with workplace procedures where applicable.
  • Respond accordingly to monitoring systems and alarms according to workplace procedures.
  • Monitor hazards and risks and ensure safety of self, other personnel, plant and equipment.
  • Complete work activity and shut-down equipment in line with work requirements and workplace procedures.

03Clean up work area

  • Clear work area and dispose, reuse or recycle materials.
  • Move the elevating work platform to a safe space, applying site specific workplace procedures and requirements.
  • Check, clean, maintain and store elevating work platform, tools and equipment according to workplace procedures.
  • Complete and file documentation, and distribute according to workplace requirements.

Frequently Asked Questions

Do I need a High Risk Work Licence to operate a scissor lift?

No. Scissor lifts do not require a High Risk Work Licence at any height, because they are not boom-type elevating work platforms. RIIHAN301E is the nationally recognised competency employers commonly refer to as Yellow Card® style training for scissor lifts.

How long is a scissor lift ticket valid for?

Your RIIHAN301E Statement of Attainment does not have a legislated expiry date, however most employers and mine sites in Western Australia require refresher training every 2–3 years to ensure your skills and knowledge remain current. Always check your employer's specific site requirements before commencing work.

What if I also need to operate a boom lift?

STES offers a combined scissor lift and boom lift (under 11m) course that covers both machine types in a single day at a discounted combined price. Boom lifts with a boom length of 11 metres or more require a WP class High Risk Work Licence instead.

What do I need to bring on the day?

You should bring a valid photo ID (driver's licence or passport), appropriate clothing including long pants and closed-toe footwear, and any prescription glasses or medication you require. All safety equipment is provided by STES. Lunch and refreshments are not provided so we recommend bringing your own.